Multi-Rotor Pixhawk2.1 Carrier Board

Multi-Rotor Pixhawk2.1 Carrier Board

179.99

The primary purpose of the SpektreWorks Multi-Rotor Carrier Board for the Pixhawk Cube is to reduce the rat’s nest of wires and modules typically associated with a multi-rotor assembly. It provides built-in power distribution, redundant power supplies for the autopilot, built-in fail-over power selection, a separate payload power regulator, and many other features.

While this carrier board is geometrically optimized for quadcopters, X8 configurations, and octocopters, it provides connections for every function of the Pixhawk autopilot. Therefore, this board can be integrated into any vehicle type that is supported by the Pixhawk Cube, including all other multi-rotor frame types, plane, rover, sub, and antenna tracker.

Quantity:
Add To Cart

Features At-A-Glance

  • Up to 12-cell Lithium battery (50.4V)
  • 140A continuous current with 280A surges
  • Power and signal for ESCs conveniently located in corners
  • 12V navigation light power available at each corner
  • Built-in power distribution
  • Built-in voltage and current sense
  • Redundant power supplies for flight critical components
  • Payload connectors with resettable fuses for 5V, 12V, and direct battery power
  • Good power and error indicator lights
  • Built-in buzzer with volume control
  • Connectors for every function of Pixhawk Cube
  • Easily accessible PWM voltage level selector (3.3V or 5V)
  • Resistant to ground bounce on PWM signal
  • Connector-compatible with standard ProfiCNC carrier board
  • Connector ports for debugging IO and FMU processors

Included Cables:

The carrier board ships with cables for the general use payload power connectors (4-pin, 5-pin, and 6-pin Clik-Mate). If a Pixhawk Cube is purchased in the same order, it will also include cables from the standard Pixhawk 2.1 Cable Set.

NOTE: Pixhawk 2.1 Cube NOT included.

Sign up to be notified when Multi-Rotor Pixhawk2.1 Carrier Boards are back in stock!

* indicates required

MultiRotor Carrier Board 3D Printable Enclosure

MR Carrier Board Front ISO.png

STL FILES

 
MR Carrier Board Rear ISO.png

STEP FILES




A note on shipping:
SpektreWorks is open for business Monday through Friday. Orders placed Friday evening, Saturday, and Sunday (Arizona time) will be processed and shipped the following Monday morning.